What are the precautions for the safety production of large ring forging factories? The following article mainly summarizes the production safety of large ring forgings, I hope you can learn about it.
There are some requirements for wastewater control in forged stainless steel forgings.1. The cooling water and tool cooling water of the heating equipment should be recycled repeatedly to minimize the
The austenitic stainless steel forgings have no isomorphous transformation during heating, and the heating temperature is too high, and the crystal grains grow vigorously. In addition, the α phase in
It is also difficult to use physical testing methods. The temperature field can be measured dynamically. It is necessary to drill holes in the forgings and bury the thermoco
The trimming of the forged hot forgings is carried out in a free state. That is, no pre-stress is applied to the entire trimming process. In the process of separating the fo
Six-face forging processing refers to the joint forging process of three-way upsetting and lengthening. Each time there must be a certain forging ratio, the eutectic carbid
The quality acceptance after carburizing, quenching and tempering is based on the technical requirements of large forgings. The complete requirements for carburizing and que
Some forgings have a long time or improper processing will inevitably cause rust, we will try to minimize it as much as possible, so today to explore the common causes of corrosion caused by stainless